Front End Alignment Specifications on a 1995 Nissan Truck

Nissan introduced the first-ever compact pickup truck to the U.S. market in 1958, back when Nissans were still known as Datsuns. Nissan redesigned its pickup truck several times, giving it a complete makeover in 1986. While several trims of the vehicle were available, Nissan generally erred to its compact pickup simply as the Nissan Pickup until they discontinued production of it in 1997. The mid-sized Frontier replaced the Pickup in 1998, and Nissan introduced the full-size Titan pickup truck in 2004.

General Alignment Information

The Nissan offered its 1995 Pickup in a variety of two-wheel-drive and four-wheel-drive trims, but all two-wheel-drive trims had the same alignment specs, as did all four-wheel-drive trims. The caster, camber, toe and steering axis inclination (SAI) are all adjustable on the front end of all trims of the 1995 Nissan pickup. The caster is the angle of a vehicles steering pivot, as it is viewed from the side of the vehicle. The camber is the angle that the wheel tilts when viewed from the front of the vehicle. If it tilts out at the top, the camber is positive. If it tilts in at the top, it is negative. The toe is the measurement of a wheels angle in relation to the center line of the vehicle. On most vehicles, the front wheels are intended to point slightly toward each other. The SAI is the measurement of the angle of the steering pivot when viewed from the front of the vehicle. All measurements are given in degrees.

Alignment Specs for the 1995 2WD Pickup

The caster angle on the front end of the 1995 two-wheel-drive Nissan Pickup should fall between +0.37 degree and +0.5 degree, with a cross tolerance of +0.75 degree. The camber angle should fall between +0.42 degree and +0.50 degree, with a cross tolerance of +0.75 degree. The toe-in should be between +0.8 degree and +0.25 degree. The SAI can range from +0.5 degree to +9.1 degrees. The alignment was not adjustable on the rear end of two-wheel-drive trims of the 1995 Nissan Pickup because it came with a fixed rear axle.

Alignment Specs for the 1995 4WD Nissan Pickup

The caster angle on the front end of the 1995 four-wheel-drive Nissan Pickup should fall between +0.50 degree and +1.3 degrees, with a cross tolerance of +0.75 degree. The camber angle should fall between +0.50 degree and +0.67 degree, with a cross tolerance of +0.75 degree. The toe-in should be between +0.8 degree and +0.32 degree. The SAI can range from +0.5 degree to +8.1 degrees. As with the two-wheel-drive trims, the four-wheel-drive trims of the 1995 Nissan Pickup truck came with a fixed rear axle and the alignment was not adjustable on the rear end.