Showing posts with label after. Show all posts
Showing posts with label after. Show all posts

Problems Starting a 2001 Kia Rio After it Rains

Tuesday, March 4, 2014 | Labels: , , , , , , , , | 0 comments |

The 2001 Kia Rio is a hatchback sedan sought after because of its fuel economy. If you have problems with your Rio after it rains, you can check for a few problems before taking it to a Kia service shop. The most common issues include the spark plug, the distribution cap and battery corrosion. You can check for these problems yourself with little hassle and minimal knowledge of how the Rio works.

Instructions

    1

    Open the Rios hood, and locate the spark plug housing on the side of the engine. Use your fingers to pull the spark plug out of the housing. Water can seep into the spark plug and cause arcing if it has worn. Replace the spark plug to fix this problem.

    2

    Check your distribution cap, found on the right side of your engine. Remove the bolts holding the distributor cap on the engine using a ratchet, and pull the distributor cap from the engine block. Feel the inside of the distributor cap for any signs of moisture. Replace the cap if you do find moisture.

    3

    Locate the battery terminals. Look for signs of corrosion, and use a pair of pliers to remove the terminals from the battery. Use a can of soda and a wire brush to clean the terminals. Replace the terminals on the battery, and try to restart the car.

Continue reading...

How do I Reset Ingersol Air Compressor After E Stop

Monday, November 4, 2013 | Labels: , , , , , , , , , | 0 comments |

In 1871, the Ingersoll Rand Co. started producing industrial tools and power equipment. Today, the company offers industrial equipment, climate control systems, security solutions, home products and power tools. Ingersoll Rand air compressors utilize safety systems to prevent personal injury and equipment damage. The "Emergency Stop" function on an Ingersoll Rand air compressor allows the operator to quickly shut down the system in an emergency. You need to reset the air compressor after engaging the "E-Stop" button before using the equipment again.

Instructions

    1

    Examine the control panel for the air compressor and locate the circular "EMEG STOP" button.

    2

    Rotate the "EMEG STOP" button clockwise.

    3

    Press the "RESET" button located on the control panel twice. After resetting the system, press the "Start" button to engage the air compressor.

Continue reading...