Repair 7

Insert the car key into the ignition and turn it to the "on" position. This will be the second click as you turn the key.

Press the "lock or "unlock" button on the keyless remote.

Turn the car key back to the locked position. This is also known as the "0" position because the key cannot be twisted anymore to the left. You will know if the key is in the "0" position if the key can be pulled out of the car.

Repeat steps 1 through 3 two more times, and be sure to use the same keyless remote each time. You should have now completed steps 1 through 3 three times.

Turn the ignition key to the "on" or "II" position by turning the key until you feel it click twice.

Press either the "lock" or "unlock" button on the keyless remote. You will now be in programming mode. If done properly, the power locks on the doors will lock and unlock automatically.

Press the "lock" or "unlock" button one more time. This should be done for any keyless remote you wish to program. You will know it is done correctly when the car locks automatically.

Turn the ignition back to the "0" or locked setting, and remove the key from the ignition.

Put the key into the ignition and turn it from the "Off" position to the "On" position eight times within 10 seconds. Make sure to end with the key turned to the "On" position. Remember, you have more than a full second to complete each turn, so dont panic and make sure to count the number of times you turn the key. When you have done this correctly, the doors lock and unlock to signify the car has entered the programming mode.

Press any button on the remote while the car is in the programming mode. The car stays in programming mode for 20 seconds. The car catches the signal and programs the remote to the system.

The car does not stay in programming mode long, so other people cannot program a remote to your car. Repeat this step within 20 seconds of programming the previous remote to program additional remotes. The doors lock and unlock after each remote has been programmed.

Turn the key from the "On" position to the "Off" position. This has the car exit the programming mode. The doors lock and unlock to confirm that it has exited programming mode and no other remotes will be able to be programmed to your car without repeating the entire process.