Showing posts with label remote. Show all posts
Showing posts with label remote. Show all posts

How to Program a 99 Land Rover HSE Homelink Remote to the Garage

Saturday, May 3, 2014 | Labels: , , , , , , , , , , , | 0 comments |

The lions share of Land Rovers success is that it belongs just about everywhere. A Land Rover can belong in the verdant green Amazon as easily as it can in the neon glitz and glam of South Beach or Paris. It can climb the Malvern Hills of England, or it can ferry a bottle of champagne to the snowy mountain peaks of Argentina. Doubtless, if it could speak, the typical Land Rover would see its Homelink control system as something of an escape button. After all, a garage is probably the only place on Earth where this legend of trail and terazzo doesnt belong.

Instructions

    1

    Park in front of your garage door, and use the garage door transmitter to open it. Identify the three Homelink buttons; the garage door button and the two others. The exact color and location of the buttons will vary by the Homelink unit manufacturer.

    2

    Press and hold the two buttons that arent the garage door button. After approximately 20 seconds, the Homelink indicator light will flash. Release the buttons.

    3

    Hold your garage door opener up to the Homelink unit, and simultaneously press and hold the garage door buttons on the Homelink unit and on your garage door opener. The Homelink unit will record the garage door openers radio frequency.

    4

    The Homelink light will flash slowly, then quickly. Release both buttons. Press the Homelink garage door button; if the indicator lights up solid, then programming is complete. If it flashes and then turns solid, proceed to the next step.

    5

    Get out of the vehicle and locate the "learn" button on your garage door opener head motor that opens and closes the garage door. Within 30 seconds, get back into the vehicle and press and hold the Homelink button for two seconds. The indicator light will flash.

    6

    Press and hold the button two to three more times, until the garage door closes. The Homelink system and garage door head are now synchronized.

Continue reading...

How to Program a Keyless Entry Remote for a 2000 Honda

Monday, April 21, 2014 | Labels: , , , , , , , , , | 1 comments |
How to Program a Keyless Entry Remote for a 2000 Honda

If you have lost your keyless remote for your 2000 Honda, you can buy a replacement remote. The replacement wont work until you manually program it for your car. You must have a key to the ignition and be able to turn on the car; this will enter the car into programming mode. If you fulfill a few basic security steps to prove that you have access to the car, you will be able to program any number of keyless remotes.

Instructions

    1

    Insert the car key into the ignition and turn it to the "on" position. This will be the second click as you turn the key.

    2

    Press the "lock or "unlock" button on the keyless remote.

    3

    Turn the car key back to the locked position. This is also known as the "0" position because the key cannot be twisted anymore to the left. You will know if the key is in the "0" position if the key can be pulled out of the car.

    4

    Repeat steps 1 through 3 two more times, and be sure to use the same keyless remote each time. You should have now completed steps 1 through 3 three times.

    5

    Turn the ignition key to the "on" or "II" position by turning the key until you feel it click twice.

    6

    Press either the "lock" or "unlock" button on the keyless remote. You will now be in programming mode. If done properly, the power locks on the doors will lock and unlock automatically.

    7

    Press the "lock" or "unlock" button one more time. This should be done for any keyless remote you wish to program. You will know it is done correctly when the car locks automatically.

    8

    Turn the ignition back to the "0" or locked setting, and remove the key from the ignition.

Continue reading...
Subscribe to: Posts (Atom)