Electric Motor Repair for an Automobile Window

Saturday, January 18, 2014 | Labels: , , , , , , | | Electric Motor Repair for an Automobile Window

When an automobiles power windows wont go up and down, several things could be the cause. A faulty switch or bad wiring are two examples. The electric window motor should also have a close look taken at it when power window problems begin to surface.

Assessment

    An electric window motor can be tested to see if its the reason a vehicles window wont go up and down. A fused jumper wire can function to send power past the switch and right to the window motor. If the motor doesnt respond, it will need to be replaced.

Repair

    Using a voltmeter allows you to verify power is traveling from the fuse box to the switch, and from the switch to the window motor. Loose connectors can prevent voltage from reaching the motor and will have to be tightened.

Replacement

    Because the interior door panel has to be taken off to reach an electric window motor, replacing them can be considered tricky on some types of vehicles. After removing the door panel, now the rivets holding the window motor in place will have to be taken out using a drill. The replacement motor will have its own rivet set for installation.

0 comments:

Post a Comment