Repair 7

How to Troubleshoot a Dodge Intrepid Transmission

If the transmission is not working as it should in your Dodge Intrepid, then you might be very worried. People have the misconception that when you have issues with a transmission it will be very costly to fix. Simple troubleshooting techniques can be performed even by someone with little mechanical ability. Set aside about two hours to troubleshoot your Dodge Intrepid transmission.

Instructions

1

Look at the ground where you regularly park your Dodge. If you have a puddle of red transmission fluid under your Intrepid, then you have a transmission leak. This is most likely the reason why your transmission is acting up.

2

Lift up the hood on your Dodge and pull out the transmission dipstick. The transmission dipstick is located on the drivers side of the engine. You will see that the dipstick is identified with the word "transmission" on the top of it.

3

Start the engine of your Dodge. Pull out the dipstick and wipe if off with the paper towel. Put the dipstick back in and take it right back out. You will see two different level lines on the dipstick. One will read "full hot" and the other "full cold." Make sure that the fluid level is correct for cold since you have not driven or warmed up the transmission yet. If you have low fluid, then this is the reason for your transmission malfunction.

4

Follow the dipstick tube down to the transmission. Locate any wires connected to the transmission. If you have any broken or disconnected connections, this could be why your Dodge Intrepid transmission is failing.