How to Install Aftermarket Fog Lights in a 2001 Civic

Wednesday, February 19, 2014 | Labels: , , , , , , , , , | | How to Install Aftermarket Fog Lights in a 2001 Civic

The Honda Civic has been around for decades, bringing style, comfort and performance to the cost-conscious consumer. Honda has been offering fog lights as either an option or standard on all model Civics for years. If you own a 2001 model year Honda you may need to replace the installed fog lights because of an accident, wear and tear of an old vehicle, or simply because youd like to personalize the look of your car. Rest assured this is an easy job to do at home.

Instructions

    1

    Locate a flat level surface with enough light. This could be a garage, driveway or parking lot. Park your Civic there, shut off the engine and apply the parking brake so that the car is safe to crawl under. Let the engine bay cool to the touch before starting work.

    2

    Lay an old blanket under the front end of your 2001 Honda Civic. Then lie down and look underneath the car at the spot directly behind the drivers side fog light. Notice the plastic dust shield. Use a screwdriver to pry this off and set it aside.

    3

    Grab hold of the wiring harness that connects the Civics power system to the fog light socket. Pull this free from the socket. Using a wrench, remove the three mounting bolts that attach the light assembly to the Civics bumper.

    4

    Slide the old fog light assembly out. Slide in the aftermarket light in its place. Lock in place with the mounting bolts. Plug the wiring harness into the new socket. Snap the dust cover back on. Repeat this process for the remaining fog light.

0 comments:

Post a Comment