Repair 7

How Do I Troubleshoot the ABS in a Chevy Light Pickup

The anti-lock braking system (ABS) in your Chevy light pickup truck helps to prevent your wheels from locking up when you slam on the brakes. This gives you some control during an emergency braking maneuver, regardless of the road conditions. Sometimes this system may malfunction, and you will know this by the ABS light showing up on your instrument panel. You can troubleshoot the problem yourself before doing the repairs yourself or taking it to a mechanic.

Instructions

1

Locate the fuse panel cover under the steering column on the dashboard. Open the cover by pulling down on it from the top.

2

Look for the fuse puller inside the fuse panel and remove it. Read the diagram on the bottom part of the fuse panel cover to locate the ABS fuse. Use the fuse puller to remove this fuse.

3

Examine the fuse to see if it has blown. You can tell if it has blown by looking at the wire inside the fuse which will be severed. If this is the case, replace it with a new fuse of the same amperage.

4

Insert the key into the ignition and start the engine. If the ABS light stays lit on the instrument panel, then you probably have a malfunction in the ABS. Have the vehicle towed to a qualified mechanic or do the repairs yourself if you know how. Do not drive the vehicle until it has been repaired.