Repair 7

How to Replace Brake Lights on the 1998 Isuzu Amigo

Changing the brake lights on your 1998 Isuzu Amigo yourself will save you money and time, and it is a relatively simple task you can perform at home. Have all supplies handy before you start to make the job go more smoothly.

Instructions

1

Remove the three screws that hold the brake light cover on your Isuzu Amigo by using the Phillips screwdriver. The first screw is located between the bumper and the cover. The other two screws are located on each side of the cover in the small black areas that resemble vents.

2

Slide the assembly straight back so the bulb is accessible.

3

Unscrew the bulb by turning it counterclockwise.

4

Screw in the new bulb by turning it clockwise. The new bulb should be model number 1157.

5

Screw the three screws back in place with the Phillips screwdriver. Tighten them enough that the light assembly does not leak or rattle around.