Repair 7

Instructions for a Plasti Kote Rust Converter

Plasti-Kote is a rust converter solution. Rust is traditionally removed by scraping and priming. However, Plasti-Kote converts the rust into harmless chemicals and creates a protective film on the surface so there is no need for scraping. Rust converters are commonly used on automobile surfaces. You can apply Plasti-Kote rust remover by following a few techniques.

Instructions

1

Remove loose rust from the affected area with a clean, bristled brush. This will prevent any loose rust from getting sealed into the affected areas when applying the rust remover.

2

Clean the rusted area with mild dishwashing soap and water then let dry. Apply a degreaser. This will prevent surface contaminants from interfering with the reaction of the rust converter.

3

Dip the applicator brush into the solution then apply an even coat to the rusted areas. It will take 24 hours for the rust converter to fully dry.

4

Apply a second coat of Plasti-Kote. Wait another 24 hours for the rust converter to completely dry before painting.