Repair 7

How to Program a Keyless Entry Remote for a 2000 Honda

If you have lost your keyless remote for your 2000 Honda, you can buy a replacement remote. The replacement wont work until you manually program it for your car. You must have a key to the ignition and be able to turn on the car; this will enter the car into programming mode. If you fulfill a few basic security steps to prove that you have access to the car, you will be able to program any number of keyless remotes.

Instructions

1

Insert the car key into the ignition and turn it to the "on" position. This will be the second click as you turn the key.

2

Press the "lock or "unlock" button on the keyless remote.

3

Turn the car key back to the locked position. This is also known as the "0" position because the key cannot be twisted anymore to the left. You will know if the key is in the "0" position if the key can be pulled out of the car.

4

Repeat steps 1 through 3 two more times, and be sure to use the same keyless remote each time. You should have now completed steps 1 through 3 three times.

5

Turn the ignition key to the "on" or "II" position by turning the key until you feel it click twice.

6

Press either the "lock" or "unlock" button on the keyless remote. You will now be in programming mode. If done properly, the power locks on the doors will lock and unlock automatically.

7

Press the "lock" or "unlock" button one more time. This should be done for any keyless remote you wish to program. You will know it is done correctly when the car locks automatically.

8

Turn the ignition back to the "0" or locked setting, and remove the key from the ignition.