Repair 7

How to Install the Windshield in a 73 Camaro

You can install a windshield on your 1973 Camaro with the help of a friend. Chevrolet introduced the Camaro to North America in 1967 as a competitor to Fords Mustang. The windshield keeps the roof from collapsing during an accident. It also helps keep you from being thrown from the vehicle. To do this job, you need some supplies that can be found at most auto parts stores. To save money, call your local auto wrecking yard to see whether it has any 1973 Camaro windshields in good condition.

Instructions

1

Fit a gasket around the new windshield. Make sure the slit on the gasket will be facing the outside of the Camaro once the windshield has been installed.

2

Run a line of sealant along the half channel all around the gasket.

3

Wipe some petroleum jelly into the gaskets outer groove, adding some extra to the top and bottom center of the gasket. Line a nylon cord around the outer groove starting at the bottom center of the gasket. Leave a piece of cord at the start and end point.

4

Put on your work gloves, and have your helper put on work gloves. Together, put the windshield into the windshield frame from outside the vehicle. Push the nylon cords into the Camaro so they are resting on the dashboard.

5

Pull one cord out and around the frame to pull the gaskets lip inside the car. At the same time, have your helper press the gasket onto the outside edge of the windshield frame.

6

Allow the sealant to cure for 24 hours before driving.