Repair 7

How to Replace the Turn Signal Bulb in a 2005 Volkswagen New Beetle

Knowing how to maintain your vehicle can save you time and money. However, maintenance on your vehicle can be a bit challenging. Learning the basics, such as how to replace your turn signal bulbs, can be tricky but also one that is rewarding for both you and your wallet.

Instructions

1

Open the trunk of your vehicle and remove the round panel directly behind the taillight assembly.

2

Unscrew the exposed black knob to release the back light casing.

3

Locate the release tab on the light and pull out the casing. The release tab should be in the gap between the light casing and the portion of the vehicle closest to the hatch back door.

4

Find the two exposed light switches on the back of the exposed light. One of the switches is for your vehicles brake light and the other is for the turn signal.

5

Disconnect the wires on the back of the turn signal and turn the switch counter-clockwise to remove.

6

Remove the old bulb and with the clean cloth, insert the new bulb. The bottom of the bulb must be lined up properly in order to secure itself in the casing.

7

Replace and reconnect the turn signal switch and wires. Replace the casing and secure the black knob and panel.

8

Turn on the turn signal to ensure that it is working properly.