Repair 7

How to Replace the Battery in a 2001 Ford Ranger

A car battery stores electrical current generated by the alternator. If it is not working correctly or has reached the end of its life span, which typically is to to three years, it must be replaced. The process for changing a battery in a 2001 Ford Ranger requires the use of basic tools.

Instructions

1

Open the 2001 Ford Ranger hood. Locate the battery at the front of the engine on the right side. Disconnect the negative (black) terminal by loosing the connection with the adjustable wrench. Disconnect the positive (red) terminal the same way.

2

Disconnect the battery tie-down using the 3/8-inch ratchet and socket. Remove the battery from the battery tray by lifting it up and out. Put the used battery to one side.

3

Install the replacement battery by placing it into the battery tray, in the same orientation as the original battery, with the terminals in identical locations. Using the ratchet and socket, tighten the battery tie-down to hold the battery in place.

4

Attach the positive terminal of the battery to the positive battery cable using the adjustable wrench. Do the same for the negative terminal. Turn on the ignition of the 2001 Ford Ranger. Allow the truck to run for at least 10 minutes to assess whether the battery is functioning properly.