Repair 7

How to Replace the Trunk Brake Light in a 1995 Honda Civic

Everyone knows that brake lights are extremely important features of a vehicle. Theyre there to keep ourselves and other drivers safe, and when brake lights burn out or get damaged, its imperative that we replace them as soon as possible. Replacing the trunk brake light on a 1995 Honda Civic wont take you long, and all you will need for the job is a screwdriver and a new bulb.

Instructions

1

Open the trunk. Disconnect the electrical wires from the hold-down clip by sliding them out toward the center of the vehicle.

2

Detach the two screws from the bulb holder using a Phillips screwdriver. Remove the bulb holder from the brake light assembly.

3

Verify which bulb needs to be replaced by having someone press the brake pedal while you look at the lights.

4

Push the bulb gently into the housing and turn it counterclockwise until it comes loose.

5

Insert the new bulb into the socket by pressing it in slightly and turning it clockwise until it locks into place. Test the new bulb before moving to the next step.

6

Reinstall the bulb holder assembly and reattach it with the two screws. Tighten the screws using a Phillips screwdriver. Place the wires back in their original location in the hold-down clip. Close the trunk.