How to Replace the Rear License Plate Bulb on a 1997 Jeep Grand Cherokee
Thursday, April 17, 2014 | Labels: 1997, a, bulb, cherokee, grand, how, jeep, license, on, plate, rear, replace, the, to | 0 comments |The 1997 Jeep Grand Cherokee has two license plate bulbs in the rear. Theyre located on the hatch shelf directly above the license plate. The front license plate doesnt require illumination, so it has no bulbs. Rear license-plate illumination, on the other hand, is mandated by law in the United States. Lighting in the rear can be overlooked since its impossible for a driver to see the back of the vehicle when driving. The license plate bulbs come on when the headlight switch is turned on.
Instructions
- 1
Ensure that the headlight switch is off. If necessary, turn on the headlight switch to determine which license plate bulb is out (unless youre replacing both). Turn the switch back off after checking.
2Raise your 1997 Grand Cherokees rear hatch.
3Remove the retaining screw on the lens cover of the faulty license plate bulb, using the screwdriver. Each lens only has one screw; its on the inside edge of the lens.
4Pull the lens downward from where the retaining screw was removed. There is a small tab on the other side of the lens that acts as a hinge and holds the other side of the lens in place.
5Pull the spent bulb straight out of the socket. Push the replacement bulb into the socket and test the light before replacing the lens assembly. Ensure that the tab on the lens is seated inside the bulbs cavity when reassembling it.
