Repair 7

How to Replace the Headlight Switch on 1991 Camaro RS

The headlight switch on a 1991 Camaro RS is located on the plastic housing surrounding the instrument cluster. This switch controls the headlights, parking lights and the dimming of the instrument panel lighting. If this switch fails, you will not be able to operate any of these lights. You can replace the switch with just a few basic tools.

Instructions

1

Remove the fog light switch from the dash housing. Use a small screwdriver and pry lightly at the edges of the switch housing. Be careful not to scratch the plastic housing that surrounds the switch. Once the switch is free, unplug it and set it aside.

2

Access the release knob located on the bottom of the headlight switch by reaching through the fog light switch opening.

3

Press the release button and pull the headlight switch knob and shaft toward you. It should release, allowing you to remove it.

4

Remove the retaining nut that holds the switch in place using a pair of long needle nose pliers.

5

Remove the cosmetic housing by pulling carefully toward you. Plastic tabs on the rear of the housing keep it in place and should release with light pressure.

6

Pull the headlight switch out to access the plug. Using a small screwdriver, press the release tab on the connector and unplug the switch.

7

Remove the old switch and plug in the new switch. Push the new switch back into place.

8

Replace the cosmetic housing. Attach the retaining nut to the headlight switch before pushing the housing into final position. Tighten the retaining nut with the long needle nose pliers. This will secure the headlight switch to the housing.

9

Insert the headlight knob and shaft into the new headlight switch. There is no need to press the release button because the switch is spring loaded. Replace the fog light switch to complete reassembly.